SA3218 – ACTIVE DSP SUBWOOFER
3 low-pass filters (80Hz, 100Hz, 120Hz) in SA3218 are available to choose according to different venues and music styles. There is also phase switch. All connectors and function buttons are on the back panel.
SA3218 subwoofer is with 1-way XLR for input and output. Signals can be sent to different speakers for sound distribution.
Frequency Response (-6dB anechoic chamber):
35Hz-150KHz
LF/MF Driver:
Customised AUDIOCENTER ferrite driver, 4” Voice Coil
Signal Input / Output Connectors:
1x NEUTRIK® Female XLR
1x NEUTRIK® Male XLR
Maximum Calculated SPL/1M:
140dB
Amplifier:
Class D
Processor:
96KHz Signal Sampling Frequency, 24bit Precision
Weight:
75Kg
Dimensions (W×H×D):
988×520×714mm
SA315 – ACTIVE DSP LOUDSPEAKER
Two combo inputs CH A (1-way XLR and Mono jack 6.35) are available in SA315, which can be switched between line input and microphone input. The audio port CH B(Mono jack 6.35 or a RCA port) is for the other sound resources like MP3, CD player, etc. There is 1-way signal input port for wireless bluetooth in it and the volume is controlled by terminal. The gain of CH A/CH B signal input is controlled by independent knob and 1-way master volume control knob. The four different audio sources can be parallel output with one-way XLR after mixed internally, and then sent to different speakers for sound distribution.
SA315 can be installed by steel wire. It can also be standing by coupling bar or three-feet stand. The pole mount is 35mm. Various accessories are offered for SA315 to meet different kinds of installs.
Frequency Response (-6dB anechoic chamber):
44Hz-20KHz
LF/MF Driver:
Customised AUDIOCENTER ferrite driver, 3” Voice Coil
Signal Input / Output Connectors:
1x NEUTRIK® Female XLR (Mono jack 6.35), 1x Mono jack 6.35, 1xRCA, 1x Wireless bluetooth,1x NEUTRIK® Male XLR
Maximum Calculated SPL/1M:
134dB
Amplifier:
Class D
Processor:
96KHz Signal Sampling Frequency, 24bit Precision
Weight:
28Kg
Dimensions (W×H×D):
439×760×454mm
SA312 – ACTIVE DSP LOUDSPEAKER
Two combo inputs CH A (1-way XLR and Mono jack 6.35) are available in SA312, which can be switched between line input and microphone input. The audio port CH B(Mono jack 6.35 or a RCA port) is for the other sound resources like MP3, CD player, etc. There is 1-way signal input port for wireless bluetooth in it and the volume is controlled by terminal. The gain of CH A/CH B signal input is controlled by independent knob and 1-way master volume control knob. The four different audio sources can be parallel output with one-way XLR after mixed internally, and then sent to different speakers for sound distribution.
SA312 can be installed by steel wire. It can also be ground standing by coupling bar or three-feet stand. The pole mount is 35mm. Various accessories are offered for SA312 to meet different kinds of installs.
Frequency Response (-6dB anechoic chamber):
48Hz-20KHz
LF/MF Driver:
Customised AUDIOCENTER ferrite driver, 2.5” Voice Coil
Signal Input / Output Connectors:
1x NEUTRIK® Female XLR (Mono jack 6.35), 1x Mono jack 6.35, 1xRCA, 1x Wireless bluetooth, 1x NEUTRIK® Male XLR
Maximum Calculated SPL/1M:
132dB
Amplifier:
Class D
Processor:
96KHz Signal Sampling Frequency, 24bit Precision
Weight:
24.5Kg
Dimensions (W×H×D):
356×608×372mm
Enquiry About the SA3-Series
